Wednesday, June 26, 2019

2019 Cadillac Truck Escalade AWD V8-6.2L Diagnostic Instructions Page 18


DTC B0023 04



- Right Roof Rail Air Bag Deployment Loop Open Circuit



DTC B0023 0D



- Right Roof Rail Air Bag Deployment Loop Resistance Above Threshold



DTC B0023 0E



- Right Roof Rail Air Bag Deployment Loop Resistance Below Threshold



Diagnostic Fault Information



Circuit/System Description



During a side or frontal crash of sufficient force the inflatable restraint sensing and diagnostic module (SDM) will allow current to flow through the



deployment loop in order to deploy the air bag module. There are 2 shorting bars used within the module connector which will short together both



high and low circuits, when the connector is disconnected. This will prevent unwanted deployment of the inflator module during servicing.



Conditions for Running the DTC



Ignition voltage is between 9-16 V.



Conditions for Setting the DTC



B0014 01, B0015 01, B0016 01, B0019 01, B0020 01, B0021 01, B0022 01, B0023 01



The air bag or seat belt retractor pretensioner high and/or low control circuit is shorted to voltage for 120 milliseconds.



B0014 02, B0015 02, B0016 02, B0019 02, B0020 02, B0021 02, B0022 02, B0023 02



The air bag or seat belt retractor pretensioner high and/or low control circuit is shorted to ground for 120 milliseconds.



B0014 04, B0015 04, B0016 04, B0019 04, B0020 04, B0021 04, B0022 04, B0023 04



The air bag or seat belt retractor pretensioner high and/or low control circuit is open for 120 milliseconds.



B0014 0D, B0015 0D, B0016 0D, B0019 0D, B0020 0D, B0021 0D, B0022 0D, B0023 0D



The air bag or seat belt retractor pretensioner deployment loop resistance is greater than 3.9 ohms for 120 milliseconds.



B0014 0E, B0015 0E, B0016 0E, B0019 0E, B0020 0E, B0021 0E, B0022 0E, B0023 0E

No comments:

Post a Comment