Sunday, August 11, 2019

2019 Cadillac Truck Escalade AWD V8-6.2L Diagnostic Instructions Page 494


DTC B2365 01



- Left Seat Rear Vertical Position Sensor Circuit Short to Battery



DTC B2365 06



- Left Seat Rear Vertical Position Sensor Circuit Short to Ground or Open



DTC B2365 5A



- Left Seat Rear Vertical Position Sensor Circuit Plausibility Failure



DTC B2375 01



- Left Seat Assembly Horizontal Position Sensor Circuit Short to Battery



DTC B2375 06



- Left Seat Assembly Horizontal Position Sensor Circuit Short to Ground or Open



DTC B2375 5A



- Left Seat Assembly Horizontal Position Sensor Circuit Plausibility Failure



Diagnostic Fault Information



Circuit Description



The position sensor that sets this diagnostic trouble code (DTC) is either attached to the seat directional motor drive cable or directly to the motor it



monitors. It receives a 5-volt reference and ground from the memory seat module (MSM). The sensor sends a voltage signal that varies with the



movement of the seat through the signal circuit to the MSM. Then based on this voltage signal, the MSM determines the position of the seat.



Conditions for Running the DTC



The memory seat module must be powered.



Conditions for Setting the DTC



B1825 01, B1850 01, B1860 01, B2355 01, B2365 01, B2375 01



If the MSM sees the analog input from this sensor is greater than 4.75 volts, the sensor will be considered out of range and the MSM will set this



DTC.



B1825 06, B1850 06, B1860 06, B2355 06, B2365 06, B2375 06



If the MSM sees the analog input from this sensor is less than 0.22 volts, the sensor will be considered out of range and the MSM will set this DTC.



B1825 5A, B1850 5A, B1860 5A, B2355 5A, B2365 5A, B2375 5A

No comments:

Post a Comment